Pultrusion Machine

 

This machine is suitable for producing G.R.P. (Glass Reinforced Plastic) Sections in different shapes & sizes like Angle sections, ‘C’ Channels, Hollow Rectangular and Circular-Tube Sections, Solid Rods etc., Due to its specific angular lever clamping mechanism in dynamic action this is more preferable for working with thin wall hollow profiles compare to direct acting hydraulic clamping, As well as more flexible for easy production adjustment while using multiple profiles with different height

This machine is suitable for producing G.R.P. (Glass Reinforced Plastic) Sections in different shapes & sizes like Angle sections, ‘C’ Channels, Hollow Rectangular and Circular-Tube Sections, Solid Rods etc.
Direct acting vertical hydraulic clamping is more preferable to work with thick wall flat and wider profiles rather than thin wall hollow profiles.
Single platen vertical hydraulic clamping with wider area allows larger width profiles and single profile option or multiple cavity similar profiles within same clamping area.
Double platen vertical hydraulic clamping allows different profiles width and height clamping in each puller as well as both platen can be engaged for one wider profile within specified limit of clamping area.

This machine is suitable for producing G.R.P. (Glass Reinforced Plastic) Sections in different shapes & sizes like Angle sections, ‘C’ Channels, Hollow Rectangular and Circular-Tube Sections, Solid Rods with lower profile size compare to Reciprocating Hydraulic machines.
As this machines are operating by mechanical traction pulling having lower pulling force in specified models, Further this machine required higher change over time and maintenance during operation.

Creel Stand / Glass Roving Stand, Roving Guide Stands, Mat Roll Stands, Preform Guide Stands, Resin Bath, Resin Injection System, Section Conveyor Roller Table

Profile section cutter comes in standard and customise size, Option are available in single cutter, double cutter and single cutter with programmable cut length for individual profile lines, Cut length is triggered by physical limit, input from digital length counter or non contact sensor,Dust collection port provided, should be connected with plant dust collection system or individual dust collector.

Suitable for Mat Roll up to Ø 400 mm X 1600 mm Length, Slitting width / Blade position adjustment by manual, Mat Roll mounting spindle movement by suitable geared reduction drive & inverter drive for achieving required spindle speed Electric requirement: 0.75 kW.Fabricated form structural steel like, channel, angle or pipe